Radiology table - D²RS 9025

D²RS, Dynamic Remote System

Stephanix's expertise. Combining elegance and compactness, this remote controlled table system will provide you with all the versatility you need for your conventional x-ray activities.

A product by Stephanix

Medical Imaging Solutions

Description

The tube can be adjusted up to 180 cm and the detector can be taken off the table, which reduces your purchase costs.

The D²RS table is developed to optimise the workflow for the user. The automatic positional system can be activated by remote control or via the console. The second monitor in the room is also touchscreen, so you can select your exposure without needing to go to the console.
The console itself has been developed with system operators and users.

Specifications

Flexibility

The D²RS 9025 table is very flexible, allowing imaging of the entire spine, the entire lower limb and technical procedures such as infiltrations, digestive examinations, etc. can be performed. The system offers the ability to adjust fluoroscopic parameters and even has two fluoroscopy modes: a classic, low-dose mode and an HCF (High Contrast Fluoroscopy) mode, with a higher dose value. This ensures that there is no longer any doubt about your ¾ lumbar positioning in particular.

Versatility

The versatility of the system allows it to work straight on the detector. The detector can support up to 310 kg, which is a clear advantage for exposures such as weight-bearing feet. You can also perform patellofemoral incidence without having to purchase an additional detector and/or console. This will reduce your purchase and maintenance costs.

Patient coverage

Column angulation
The tube column offers a full angle sweep of +/- 40 °. With tabletop movements, it’s easier to do exams requiring oblique rays, even at the end of the table, without moving the patient.

Linear movements
The combination of the carriage of the column / detector assembly with the tabletop longitudinal and lateral movements and with the column angulation, offers complete x-ray coverage over the tabletop, whether vertical or horizontal position.

Accessibility

Rear access
The 120 cm longitudinal tabletop side access at the head side and 60 cm on the foot side (or vice versa) free up space for the operators and simplify patient transfer from stretcher to table.

Robustness
Accessible to challenging or bariatric patients, the table has no movement restrictions up to 230 kg and can support up to 310 kg in horizontal position.

Weight-bearing exams
Thanks to the motorized movement of the tabletop with the footrest, weight-bearing examinations are done without repositioning the patient (and the footrest), for greater comfort.

Don't wait any longer and contact us for more information on this product.

Multipurpose

This fully digital system with its flat panel detector inside the bucky enable all fluoroscopy and radiography procedures, but also all examinations requiring direct exposures (patellofemoral, etc.) thanks to the Wi-Fi detector.

Ergonomics

The touch control console offers an ergonomic interface combining modernity and aesthetics.
No pressure needed to activate, just the touch of your finger on the surface of the button, of the joystick or of the 10 ” adjustable touchscreen.

The main controls are available on the infrared remote control, such as auto positioning, table, tabletop and tube movements, for smooth adjustment of the table as close as possible to the patient.

After selecting a protocol, the Auto-Positioning is activated by the “MOVE” button, controlling many automations such as table movements, collimation, additional filtration, generator settings and image processing.

Status LEDs provide a design touch and system’s status: preparation for the exposure, X-ray exposure, moving table … An elegant lightning that emphasizes its modern design.

Software features

Stitching
2021 celebrates the 15th anniversary of our patented stitching technology.

Stephanix has patented its acquisition method for examining large anatomical regions (full spine or full leg for example).

Acquisition on patient in standing or lying position, with automatic positioning of the system and pre-programmed adjustment of the radiological parameters for each of the images.
Optimized overlapping zones for efficient recognition of pixels used for automatic pasting.

DSA
Angiography module is available with many features such as roadmapping, automatic programming of injections, landmarking, pixel shift, etc.

Tomosynthesis

3D volume reconstruction from a multi-slice acquisition. User can easily scroll through the slices for better diagnostic performance. Radiation dose levels are comparable to conventional radiography.

Documents

Brochure D2RS